代表性论文

1. Xia Y, Wan Y, et al .Development of a toolholder with high dynamic stiffness for mitigating chatter and improving efficiency in face milling[J]. Mechanical Systems and Signal Processing, 2020,145.

2. Wang H, Wan Y, Li Q, et al. Porous fusion cage design via integrated global-local topology optimization and biomechanical analysis of performance[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 112: 103982.

3. Zhang X, Wan Y, Ren B, et al. Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination[J]. Micromachines, 2020, 11(3): 316.

4. Wang G, Wan Y, Ren B, et al. Bioactivity of micropatterned TiO2 nanotubes fabricated by micro-milling and anodic oxidation[J]. Materials Science and Engineering: C, 2019, 95: 114-121.

5. Wang G, Wan Y, Liu Z. Construction of Complex Structures Containing Micro-Pits and Nano-Pits on the Surface of Titanium for Cytocompatibility Improvement [J]. Materials, 2019, 12(17): 2820.

6. Ren B, Wan Y, Wang G, et al. Morphologically modified surface with hierarchical micro-/nano-structures for enhanced bioactivity of titanium implants[J]. Journal of materials science, 2018, 53(18): 12679-12691.

7. Wang G, Wan Y, Liu Z. Incorporation of antibacterial ions on the micro/nanostructured surface and its effects on the corrosion behavior of titanium. Materials Letters, 2018.

8. Wang G, Wan Y, Ren B, et al. Fabrication of an orderly micro/nanostructure on titanium surface and its effect on cell proliferation. Materials Letters, 2018, 212: 247-250.

9. Liang X, Wan Y, Zhang C, et al. Robust position control of hydraulic manipulators using time delay estimation and nonsingular fast terminal sliding mode. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2018, 232(1): 50-61.

10. Liang X, Wan Y, Zhang C. Task Space Trajectory Tracking Control of Robot Manipulators with Uncertain Kinematics and Dynamics[J]. Mathematical Prob